New update: CALPUFF course in Santiago, Chile 3rd March 2014

włącz . . Odsłony: 23108

calpuff course in the seminar of olores.orgOlores.org is aware of the multiple issues and questions of odour modellers every day. There is a wide-ranging discussion about CALPUFF modelling with special focus on:

  • Complex terrain
  • Coastal regions/ land-water boundaries
  • Overwater transport
  • Inhomogeneous dispersion conditions
  • Stagnation (99% of odor complaints)
  • Flow reversals
  • Recirculation
  • Subhourly data management.
  • Selection of proper averaging times.
  • Peak to mean factors.

Inscription is already complete for the CALPUFF course. However, you may send us an email, in case we have the chance to include more people.

 


 

Exponent’s Atmospheric Sciences staff has experience serving a wide range of industrial and government clients around the world. Their scientists and engineers have been influential in the evolution of air quality modelling, and have developed or contributed to five of the seven U.S. EPA models recommended in the Guideline on Air Quality Models. Most notable of these is the CALPUFF model, an advanced non-steady-state meteorological and air quality modelling system recommended by many regulatory agencies worldwide as the preferred model for assessing near-field complex meteorological conditions and long-range transport applications.

Joseph Scire, CCM is a Principal Scientist at Exponent and an author of the CALPUFF model (Scire et al., 2000). He will provide training on the CALPUFF modelling system. He has more than 35 years experience in the design, development, and application of research and regulatory air quality models. He has taught more than 80 training courses over the last 18 years on the CALPUFF model for government agencies, private industry, and universities around the world.

Jenny Barclay is an independent atmospheric scientist. With 21 years of experience in dispersion modelling, Jenny was part of the Atmospheric Sciences group that developed the CALPUFF model and she is expert in odour modelling with CALPUFF.

The program of the course is the following:

 


 

Introduction to Odour Modelling

Course Outline

Ecometrika Odour Management, Santiago, Chile

March 3, 2014

Instructors: Joe Scire and Jenny Barclay

Monday, March 3: Morning

MODELLING TECHNIQUES (8:30 a.m. – 10:30 a.m.)

    1. Overview of the CALPUFF non-steady-state modelling system

    2. Special factors in odour modelling

1.2.1 Light wind speed dispersion/stagnation conditions

1.2.2 Steady-State Index

1.2.3 Complex dispersion conditions

1.2.4 Use of sub-hourly meteorological data

Morning Break (10:30 a.m. – 10:45 a.m.)

    1. CALPUFF software system

1.3.1 Model components, Graphical User Interface

1.3.2 Forecasting system for odour problems

1.3.3 Forensic modelling to diagnose source contributions

    1. Demonstration of the CALPUFF software

Lunch (12:30 p.m. – 1:30 p.m.)

Monday, March 3: Afternoon

ODOUR MODELLING (1:30 p.m. – 3:00 p.m.)

    1. Odour Properties and Effects

    2. Odour Assessment

    3. Olfactometry and Sampling

    4. Odour Regulation

    5. Dispersion Model Inputs and Emissions

    6. Odour Modelling

2.6.1 Sub-hourly Data

2.6.2 Peak to Mean ratios

    1. Interpretation of Results and Complaint Analysis

Afternoon Break (3:00 p.m. – 3:15 p.m.)

HANDSON ODOUR COMPUTER EXERCISES (3:15 p.m. – 5:30 p.m.)

3.0 Application of CALPUFF to an Odour Problem

3.1 Subhourly Odour Case Study

 Download de program here


 inscription closed

The course will take place at the facilities of Ecometrika in Av. Amèrico Vespucio 2296, El Cortijo. Conchalí, Santiago, Chile. The cost of this one-day course is €225 EUR (VAT excluded). To register to the course, please contact us. Please note that we reserve the right to cancel the course, in case there are not enough attendees. Shall this happen, we will refund the full cost of the course.

For this introductory course there is no need to buy expensive Graphical User Interface (GUI) or have special software requirements. At the end of the course you will have a working copy of the CALApps GUI for free for your use. You do not need to buy model software or pay for additional data for this course either.

Please note that although the CALApps GUI is provided free, it does depend on third party software (Surfer graphics software by Golden Software, Inc.) to produce vector and contour plots. Download a working demo of Surfer and see videos for training on this software. A licensed copy of Surfer is required for CALApps to produce graphics, but not to set up or run the CALPUFF modelling components.

 

 

 

 

If you find this article interesting, you might be also interested in these articles.

Komentarze (0)

There are no comments posted here yet

Skomentuj

  1. Posting comment as a guest.
Załączniki (0 / 3)
Share Your Location
  • Merry Christmas and happy festivities

    22 grudzień 2021
     We hope you spend a wonderful time with your family and friends on these special dates. Many things have happened along this year 2021. It was a complicated year in general and particularly hard...
  • Drone-based environmental odour monitoring: SNIFFDRONE

    23 listopad 2021
       Wastewater treatment plants (WWTPs) produce gaseous emissions that might be olfactory annoying to the surrounding population. Current odour assessment methodologies are based on costly ...
  • Rubix changes to Ellona

    10 listopad 2021
        The French company Rubix, directed by the Mr. Jean-Christophe Mifsud, former CEO of Alpha MOS is switching to a more intelligence-focused service and that is why the company recentl...
  • Incidence with olores.org e-mails

    10 listopad 2021
       For technical reasons, we were unable to receive or send e-mails from our Olores.org accounts during a couple of weeks of November. So, if you contacted any of us from the 3rd November un...
  • New Development International handbook on Odour Management Plans

    29 lipiec 2021
       The AMIGO Association is starting to take the first steps to create an International Guideline on Odour Management Plans (OMPS) and is looking for volunteers with experience in this fie...
  • Standard development on IOMS halted

    29 czerwiec 2021
       Over five years have passed by since the first meeting of the Working Group (WG) 41 dealing with Instrumental Odour Monitoring Systems (IOMS). WG41 is under the umbrella of the Technical ...
  • Registration for the EN 13725 Interlaboratory Comparison 2021 is now open

    09 marzec 2021
       Olfasense has announced the registration for the annual proficiency test for Dynamic Olfactometry according to the European Standard EN 13725. All laboratories around the world are invite...
  • IEEE looks for Standardization Volunteers

    26 styczeń 2021
       The Institute of Electrical and Electronics Engineers (IEEE) has launched a new open call for experts to participate in several new standards related to Olfaction Devices. The organizatio...
  • What happened in 2020 in the odour management world

    31 grudzień 2020
    The team of Olores.org would like to wish all its readers a Happy New Year. Again Olores.org has grown beyond our wildest expectations. In terms of readership, this year we got about 63,088 page views...
  • 1st Workshop of ASPIDI project in Puglia, Italy

    25 listopad 2020
       This Thursday, November 26th, at 15:00 (CET), the first workshop of the ASPIDI project (Automatic System Supported by the Population for the Identification of Diseases by Smelling Immunit...

UWAGA! Ten serwis używa cookies i podobnych technologii.

Brak zmiany ustawienia przeglądarki oznacza zgodę na to. Czytaj więcej…

Zrozumiałem