Colorimetric methods

on . . Visite: 98620

 The colorimetric methods are able to identify, in many cases in a quantitative way, the presence of a gas. It is possible to use patches or colorimetric tubes or badges.

Badges.

  The badges are a one-use piece of cardboard with a small surface coated with a chemical that changes its colour when exposed to a certain gas. Both the time exposure and the intensity of the colour change are important. The badges show an integrated averaged value not very precise but useful when dealing with personal protection exposure.

 

These devices might be hanged anywhere, or be carried on the worker's cloths or they might be combined with small fans for different applications. Hydrogen sulphide badges are well used in farming, for example to limit H2S exposure in workers.

 

Colorimetric tubes.

  There are different types of colorimetric tubes to measure a wide range of gases. The Colorimetric tubes are glass tubes with both ends closed. To perform a measurement with a colorimetric gas tube, both ends of the tube must be broken. Then the tube is connected to a pump (manual or electronic). The pump makes the gas to circulate through the tube with a known volume of odorous gas. The media inside the tube reacts with the gas and change its colour according with the type of gas sampled. A scale is used to measure the amount of gas that reacts with the media. This scale indicates the concentration of the gas detected.

The colorimetric tubes usually have limited scales and the precision is around 10-20% of the full reading scale of the tube. The colorimetric tubes offer almost instant readings with detection limits down to 0,2 ppm in the case of Hydrogen sulphide (H2S). The cost of a manual pump stay between 300-500 €. The diffusion tubes that measure a mean concentration are also available for certain gases.

It is possible to find colorimetric tubes that work by means of a mechanism of diffusion, without the need of a pump. To use these passive samplers, one of the ends of the tube is opened and then the tube is placed in the site to be monitored. After a known period of time (normally 6 to 8 hours), a reading is taken by the colour change observed in the tube. This parameter and the exposition time are used to calculate average concentration for the time period sampled. This tubes have a price of around 6-8 € each.

You can check the different colorimetric tube makers in the directory of this site, or just clicking here.

Comments (0)

There are no comments posted here yet

Leave your comments

  1. Posting comment as a guest.
Attachments (0 / 3)
Share Your Location
  • Merry Christmas and happy festivities

    22 Dicembre 2021
     We hope you spend a wonderful time with your family and friends on these special dates. Many things have happened along this year 2021. It was a complicated year in general and particularly hard...
  • Drone-based environmental odour monitoring: SNIFFDRONE

    23 Novembre 2021
       Wastewater treatment plants (WWTPs) produce gaseous emissions that might be olfactory annoying to the surrounding population. Current odour assessment methodologies are based on costly ...
  • Rubix changes to Ellona

    10 Novembre 2021
        The French company Rubix, directed by the Mr. Jean-Christophe Mifsud, former CEO of Alpha MOS is switching to a more intelligence-focused service and that is why the company recentl...
  • Incidence with olores.org e-mails

    10 Novembre 2021
       For technical reasons, we were unable to receive or send e-mails from our Olores.org accounts during a couple of weeks of November. So, if you contacted any of us from the 3rd November un...
  • New Development International handbook on Odour Management Plans

    29 Luglio 2021
       The AMIGO Association is starting to take the first steps to create an International Guideline on Odour Management Plans (OMPS) and is looking for volunteers with experience in this fie...
  • Standard development on IOMS halted

    29 Giugno 2021
       Over five years have passed by since the first meeting of the Working Group (WG) 41 dealing with Instrumental Odour Monitoring Systems (IOMS). WG41 is under the umbrella of the Technical ...
  • Registration for the EN 13725 Interlaboratory Comparison 2021 is now open

    09 Marzo 2021
       Olfasense has announced the registration for the annual proficiency test for Dynamic Olfactometry according to the European Standard EN 13725. All laboratories around the world are invite...
  • IEEE looks for Standardization Volunteers

    26 Gennaio 2021
       The Institute of Electrical and Electronics Engineers (IEEE) has launched a new open call for experts to participate in several new standards related to Olfaction Devices. The organizatio...
  • What happened in 2020 in the odour management world

    31 Dicembre 2020
    The team of Olores.org would like to wish all its readers a Happy New Year. Again Olores.org has grown beyond our wildest expectations. In terms of readership, this year we got about 63,088 page views...
  • 1st Workshop of ASPIDI project in Puglia, Italy

    25 Novembre 2020
       This Thursday, November 26th, at 15:00 (CET), the first workshop of the ASPIDI project (Automatic System Supported by the Population for the Identification of Diseases by Smelling Immunit...

NOTA! Questo sito utilizza i cookie e tecnologie simili.

Se non si modificano le impostazioni del browser, l'utente accetta. Learn more

I understand